NA Celicas
NACelicas has now merged into Garage-X.org so for all the Toyota Celica info you were looking for, please check out the Toyota section on Garage-X.org.

Thanks,
Jamie
Garage-X.org
NA Celicas

Dedicated To The FWD Naturally Aspirated Toyota Celica's With The 3SGE, 5SFE, 3SFE And The 4AFE - Including Turbo And 4WS Models
 
HomeRegisterLog in

Share | 
 

 6th Gen JDM Engine Specs

View previous topic View next topic Go down 
AuthorMessage
Celica_XR9145
Admin
Admin
avatar

Posts : 481
Points : 788
Reputation : 2
Join date : 2009-07-14
Location : Dunedin, New Zealand

PostSubject: 6th Gen JDM Engine Specs   Sun Jul 26, 2009 6:27 am

JDM Engine Specifications
In Japan, the '94-98 Toyota Celica came with one of three engines. The SS-I came with the 3S-FE engine, the SS-II and SS-III came with the 3S-GE engine, and the GT-4 was powered by the 3S-GTE engine. In 1996, the 3S-FE engine was improved slightly to increase fuel economy and decrease vibrating noises. In 1997, Toyota introduced VVT-i to the 3S-GE engine for the 1998 Celica, which increased horsepower and torque substantially, and improved fuel economy. You can identify 3S-GE engines with VVT-i, because they have a red valve cover that says "Beams." The 3S-FE runs optimally on regular octane unleaded gasoline, but the more performance-oriented 3S-GE and 3S-GTE engines require premium octane unleaded gasoline.

Some people wonder if the 3S-GE engine will be the same as the 3S-GTE if you add a turbo to it. It will not be the same. The 3S-GE engine with VVT-i has a compression ratio of 11.0:1 and the 3S-GE without VVT-i has a compression ratio of 10.3:1, while the 3S-GTE engine has a compression ratio of 8.5:1. So to add a turbo to the 3S-GE, you would need to lower the compression through the use of internal engine parts. Below are the specifications for these engines.

Engine: 3S-FE 3S-GE 3S-GTE
Cylinders: 4 4 4
Displacement: 2.0 liters 2.0 liters 2.0 liters
Type: DOHC DOHC VVT-i1 DOHC
Horsepower: 138@6000 RPM 197@7000 RPM 251@6000 RPM
Torque: 138@4400 RPM 152@6000 RPM3 225@4000 RPM
Forced Induction: None None Turbo

1 - In 1994 through 1997 Celicas, the 3S-GE did not have VVT-i.
2 - In 1994 through 1997 Celicas, the 3S-GE only produced 177 hp@7000 rpm.
3 - In 1994 through 1997 Celicas, the 3S-GE only produced 142 lbs.-ft. of torque@4800 rpm.

Return to the info articles

_________________

1990 Toyota Celica GTR 4WS ST183 - Steer From The Rear, Literally!
http://www.cardomain.com/ride/3188393
Back to top Go down
http://nacelicas.darkbb.com
 
6th Gen JDM Engine Specs
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» New 2002 CB500 Owner
» Onan 4Cyl diesel 1.9L
» Can Am Maverick Engine specs
» RCGF 45cc Petrol Engine
» FLYWHEEL TORQUE SPECS ???

Permissions in this forum:You cannot reply to topics in this forum
NA Celicas :: Celica Tech :: Celica Info-
Jump to: